Samoreen
Active Member
- Joined
- Jun 12, 2008
- Messages
- 206
- Location
- Samoreau, France
- Lightroom Experience
- Power User
- Lightroom Version
- Classic
Hi,
The problem
When printing RAW or TIFF files from LR2, you get a printer output that is much darker than it should be and that presents various color shifts.
I'm using an Epson Stylus Pro 38'' with the latest Windows driver (6.5' - which is rather old by the way). The workaround described below works for me under Windows XP SP3. It should also probably work with other systems/printers/drivers. Use at your own (minor) risk.
The "official" and recommended procedure for printing from LR is as follows:
1. Do not let the printer manage colors and select "Other..." from the profile dropdown list and select the ICC/ICM paper/printer profile that you want to use.
2. Click on Print... in LR which opens the Print Settings dialog.
3. Select the options you need and the paper you're using.
4. Disable the color management on the driver's side (in Epson's drivers, "Mode | Custom | No Color Adjustments").
5. Print
Unfortunately, this doesn't work for many of us and this produces a print that is dark and has color shifts as mentioned above. Note that the same image prints correctly from QImage or Photoshop CS3 (that is, the printer output corresponds to what you see on your calibrated display).
Note: If you decide to let the printer manage colors, you'll get even more problems.
Apparently, although color management has been (allegedly) disabled in the driver, there's something wrong between LR and the driver which makes that both LR and the driver are still trying to manage colors. In other words, the "No Color Adjustements" option of the driver doesn't seem to work with LR.
The workaround (found after hours of hair pulling and paper and expensive ink wasting):
In step #4,
1. Instead of selecting "No Color Adjustments", set Mode to "Custom | ICM"
2. Click Advanced...
3. Check "Show all profiles".
4. Select Driver ICM (Advanced)"
5. Set both the "Input profile" and the "Printer profile" fields to the very same profile that you specified in LR.
That is, if you specified Pro38 PGPP (Premium Glossy Photo Paper) in LR, then also select Pro38 PGPP in both "Input Profile" and "Printer Profile". This has actually the same effect as disabling color management in the driver (what "No Color Adjustements" should normally take care of).
That's it. When printing, you'll get exactly the same color results as when printing from QImage or Photoshop. No more dark prints. No more color shifts.
One might think that the bug is in the Epson driver but in that case, QImage would have the very same problem. So I tend to think that the bug is on the Lightroom side.
Note: Although Photoshop CS3 produces a correct printer output, it demonstrates the same problem as LR when using the "Match Print Color" option for soft proofing. But in that case, only the preview colors are wrong. The printer output is ok. Which also tends to demonstrate that Adobe has the problem, not Epson. Or maybe both...
Don't ask me why some users have the problem and others don't.
Hope this helps.
Update
According to my experience with LR3, this problem has apparently been fixed by Adobe (at least, this is what I observe when printing with my Epson Stylus Pro 38'').
The problem
When printing RAW or TIFF files from LR2, you get a printer output that is much darker than it should be and that presents various color shifts.
I'm using an Epson Stylus Pro 38'' with the latest Windows driver (6.5' - which is rather old by the way). The workaround described below works for me under Windows XP SP3. It should also probably work with other systems/printers/drivers. Use at your own (minor) risk.
The "official" and recommended procedure for printing from LR is as follows:
1. Do not let the printer manage colors and select "Other..." from the profile dropdown list and select the ICC/ICM paper/printer profile that you want to use.
2. Click on Print... in LR which opens the Print Settings dialog.
3. Select the options you need and the paper you're using.
4. Disable the color management on the driver's side (in Epson's drivers, "Mode | Custom | No Color Adjustments").
5. Print
Unfortunately, this doesn't work for many of us and this produces a print that is dark and has color shifts as mentioned above. Note that the same image prints correctly from QImage or Photoshop CS3 (that is, the printer output corresponds to what you see on your calibrated display).
Note: If you decide to let the printer manage colors, you'll get even more problems.
Apparently, although color management has been (allegedly) disabled in the driver, there's something wrong between LR and the driver which makes that both LR and the driver are still trying to manage colors. In other words, the "No Color Adjustements" option of the driver doesn't seem to work with LR.
The workaround (found after hours of hair pulling and paper and expensive ink wasting):
In step #4,
1. Instead of selecting "No Color Adjustments", set Mode to "Custom | ICM"
2. Click Advanced...
3. Check "Show all profiles".
4. Select Driver ICM (Advanced)"
5. Set both the "Input profile" and the "Printer profile" fields to the very same profile that you specified in LR.
That is, if you specified Pro38 PGPP (Premium Glossy Photo Paper) in LR, then also select Pro38 PGPP in both "Input Profile" and "Printer Profile". This has actually the same effect as disabling color management in the driver (what "No Color Adjustements" should normally take care of).
That's it. When printing, you'll get exactly the same color results as when printing from QImage or Photoshop. No more dark prints. No more color shifts.
One might think that the bug is in the Epson driver but in that case, QImage would have the very same problem. So I tend to think that the bug is on the Lightroom side.
Note: Although Photoshop CS3 produces a correct printer output, it demonstrates the same problem as LR when using the "Match Print Color" option for soft proofing. But in that case, only the preview colors are wrong. The printer output is ok. Which also tends to demonstrate that Adobe has the problem, not Epson. Or maybe both...
Don't ask me why some users have the problem and others don't.
Hope this helps.
Update
According to my experience with LR3, this problem has apparently been fixed by Adobe (at least, this is what I observe when printing with my Epson Stylus Pro 38'').